Furnace Maintenance Company in Killworth, Ontario

Furnace Maintenance Services in Killworth, Ontario.

In the chilly winters of Killworth, Ontario, reliable heating is essential, and PlumbHouse Plumbing, Heating, & Electrical is here to provide superior furnace maintenance services, ensuring your home stays warm and cozy. Recognizing the crucial role of a well-functioning furnace, our skilled team commits to keeping your heating system running at its best throughout the season. Our extensive maintenance plans, tailored for the residents of Killworth, capture your attention by keeping your furnace in optimal condition. These services not only prolong the life of your furnace but also enhance its energy efficiency, offering the possibility of lower utility costs. Let your need for a comfortable, hassle-free winter motivate you to arrange a maintenance appointment with PlumbHouse. Depend on us to maintain your furnace in prime condition, providing you with consistent warmth and peace of mind in the winter's depths.

What is the difference between furnace maintenance and furnace repair?

Maintenance involves proactive care for a functioning system to prevent any future breakdowns. The objective is to ensure the continuous, smooth operation of your furnace. In a maintenance session, we thoroughly check and adjust all systems to confirm their proper functioning.

Conversely, repair is necessary once a breakdown has occurred. The aim here is to perform a thorough diagnostic to identify and resolve issues with your heating equipment. Unlike maintenance costs, the expense of furnace repair cannot be estimated over the phone and is only ascertainable following a diagnostic evaluation.

How does the furnace maintenance work?

Our professional team at Plumbhouse has designed a check-list to address all common furnace problems. We go through this checklist with every furnace maintenance client:
  • Replace the air filter
  • Clean and adjust the pilot light
  • Inspect Burner System
  • Inspect Heat Exchanger
  • Inspect Flue Pipe
  • Lubricate moving parts

When is the best time to start furnace maintenance?

The best time to start is early fall because furnaces in Killworth, Ontario usually spend all summer inactive. We will give your furnace a full check to make sure everything is functioning properly and your heating system is ready for a cold winter.

Even if you missed fall and the snow is already at your door front, you can still enjoy the benefits of professional furnace maintenance for the rest of that winter and many winters to come.

Furnace Maintenance Tips

Check your air filter regularly

  • A dirty filter can cause lots of problems. The most common ones are:
    • Failure of the blower motor
    • Bad Heat Exchanges
    • Plugging of A-Coil
    • Hi-Limit Switch Stuck open
  • All these problems can lead to the replacement of one or several parts, as well as replacement of the whole furnace.
  • When you’re replacing the filter, pay attention to the arrow on the filter. The arrow should be pointing towards the blowing motor (furnace).
  • During the Autumn and Spring seasons, 1 filter can last up to 3 months, while in winter, it lasts around 3-4 weeks.
  • You might need to replace your filters more frequently when you’re doing the remodelling.

Regular duct cleaning

  • The most important part is to get your coil cleaned because it will prevent your furnace from overheating.
  • If you do the remodelling in your house, the duct gets plugged up very fast. You should clean the duct after the remodelling is done.
  • Duct cleaning is not something you can do yourself. You should seek help from certified specialists for that.
  • Right after the duct cleaning, your new air filter will get dirty much faster (about 1 week), be sure to replace it to prevent overheating.

Keep return grills open

  • Never close more than ⅓ of all supplies in your house. Optimally, you should keep them all open.
  • Check your return grills, make sure they aren’t blocked. If they are blocked, your furnace will overheat.

Check thermostat

  • The low-battery symbol shows up when the batteries are low. However, you can miss that notification and find yourself with a thermostat that is not responding to your input.
  • Your thermostat might also run into a program mode and strat changing the temperature all the time, instead of holding the one you chose. It is a good idea to learn how the thermostat program mode works to recognize this behaviour next time something goes wrong.

Check intake and Exhaust pipes (for high-efficiency furnaces)

  • Make sure your pipes outside the house are not covered with snow. If the exhaust and intake are covered with snow, your furnace is going to stop working. Make sure the area underneath the pipes is shovelled, so the snow is not getting too high.

Examine the furnace for leaks

  • If you notice any rust buildup or freshwater, try to figure out where that water comes from. It might be from the ac or humidifier. Only high-efficiency furnaces(with PVC pipes) create water that might leak.

Regularly clean the flame sensor

  • Make sure you turn the furnace off before taking the flame sensor out.
  • Use a scouring pad to clean the sensor. Don’t use sandpaper for that purpose, as dust builds up much faster after you use sandpaper. Grip it with the scouring pad and polish it up until gets the shiny metal look.

Providing Residential and Commercial Plumbing, Heating & Electrical Services in London Ontario